Reference Technical Data - Toyota GR Supra Owner's Manual

328
7-1. REFERENCE
Technical data
7-1.REFERENCE
Vehicle features and
options
This chapter describes all stan-
dard, country-specific and
optional features offered with
the series. It also describes fea-
tures and functions that are not
necessarily available in your
vehicle, e.g., due to the selected
options or country versions. This
also applies to safety-related
functions and systems. When
using these functions and sys-
tems, the applicable laws and
Dimensions
The dimensions can vary depending on the model version, equip-
ment or country-specific measurement method.
The specified heights do not take into account attached parts, for
instance a roof antenna, roof racks or spoiler. The heights can devi-
ate, for instance due to the selected special equipment, tires, load
and chassis version.
Width with mirrors
Width without mirrors
Height
Length
Wheelbase
Smallest turning radius diam.
*1
: SZ-R models
*2
: RZ models
Supra Owner's Manual
regulations must be observed.
General information
The technical data and specifi-
cations in this Owner's Manual
are used as guidance values.
The vehicle-specific data can
deviate from this, for instance
due to the selected special
equipment, country version or
country-specific measurement
method. Detailed values can be
found in the approval docu-
ments, on labels on the vehicle
or can be obtained from your
Toyota dealer.
in/mm 79.8 / 2026
in/mm 73.0 / 1854
51.1 / 1299
in/mm
50.9 / 1294
in/mm 172.5 / 4381
in/mm 97.2 / 2470
ft/m 36.1 / 11
*1
*2