Toyota GR Supra Owner's Manual page 281

One to four yellow wheels
A flat tire or major drop in the
tire inflation pressure has
occurred in the indicated tires.
Gray wheels
It may not be possible to identify
tire inflation pressure losses.
Possible causes:
• Malfunction.
• During tire inflation pressure
measurement, after confirma-
tion of the tire settings.
• For tires with special
approval: the system is being
reset.
Reset the tire inflation
pressure
Via Toyota Supra Command:
1
"My vehicle"
2
"Vehicle status"
3
"Tire Pressure Monitor"
4
"Tire settings"
• When not selecting "Other
tire":
5
"Confirm settings"
6
Drive the vehicle.
• When selecting "Other tire":
7
"Tire settings"
8
Switch on drive-ready state
and do not drive off.
9
Reset tire inflation pressure:
"Perform reset".
Supra Owner's Manual
6-1. MOBILITY
10Drive away.
The wheels are displayed in red
and the following is displayed
"Resetting Tire Pressure Moni-
tor...".
After driving faster than 19
mph/30 km/h for a short period,
the set tire inflation pressures
are accepted as the target tire
inflation pressures. The reset is
completed automatically while
driving.
After a successfully completed
reset, the wheels on the Control
Display are shown in green and
the following is displayed: "Tire
Pressure Monitor active. See
label for recommended pres-
sure.".
You may interrupt this trip at any
time. When you continue the
reset resumes automatically.
Messages: for tires with-
out special approval
General information
A low tire inflation pressure may
cause the VSC Vehicle Stability
Control System to be switched
on.
281
6