Toyota GR Supra Owner's Manual page 276

276
6-1. MOBILITY
While the tire is being filled with
sealant, the tire inflation pres-
sure may sporadically reach
approx. 5 bar. Do not switch off
the compressor at this point.
Checking and adjusting
the tire inflation pressure
Checking
1
Switch off the compressor.
2
Read the tire inflation pres-
sure on the tire pressure
gauge.
To continue the trip, a tire infla-
tion pressure of at least 2 bar
must be reached.
Removing and stowing the
sealant container
1
Unscrew the filling hose of
the sealant container from
the tire valve.
2
Press the red unlocking
device.
3
Remove the sealant con-
tainer from the compressor.
4
Wrap and store the sealant
container in suitable material
to avoid dirtying the cargo
area.
Supra Owner's Manual
Minimum tire inflation pres-
sure is not reached
1
Pull the connector out of the
power socket inside the vehi-
cle.
2
Drive 33 ft/10 m forward and
back to distribute the sealant
in the tire.
3
Screw the connection hose of
the compressor directly onto
the tire valve stem.
4
Insert the connector into the
power socket inside the vehi-
cle.
5
With standby state switched
on or the engine running,
switch on the compressor.
If a tire inflation pressure of at least
2 bar cannot be reached, contact
your Toyota dealer.
If a tire inflation pressure of at least