Toyota GR Supra Owner's Manual page 127

cally returns to the center
position when released.
Engaging selector lever
position P
Press button P.
Rolling or pushing the
vehicle
General information
In some situations, the vehicle is
to roll without its own power for
a short distance, for instance in
a vehicle wash, or be pushed.
Engaging selector lever
position N
1
Switch on drive-ready state
while pressing on the brake
pedal.
Supra Owner's Manual
4-1. CONTROLS
2
If necessary, release the
parking brake.
3
Depress the brake pedal.
4
Touch the selector lever lock
and engage selector lever
position N.
5
Switch off drive-ready state.
In this way, standby state remains
switched on, and a vehicle mes-
sage is displayed.
The vehicle may roll.
NOTICE
Selector lever position P is auto-
matically engaged when standby
state is switched off. There is a
risk of damage to property. Do not
switch standby state off in vehicle
washes.
Irrespective of standby state, the
selector lever position P is auto-
matically engaged after approx.
35 minutes.
If there is a malfunction, you
may not be able to change the
selector lever position.
Electronically unlock the trans-
mission lock, if needed, refer to
page 129.
Kickdown
Kickdown is used to achieve
maximum driving performance.
Step on the accelerator pedal
beyond the resistance point at
the full throttle position.
127
4