Toyota GR Supra Owner's Manual page 187

are suppressed depending on
the situation, for instance
during passing without a turn
signal or when purposely driv-
ing over lane markings in
curves.
 "Off": no warnings are issued.
The selected setting is stored for
the driver profile currently used.
Setting the force of the steer-
ing wheel vibration
Via Toyota Supra Command:
1
"My Vehicle"
2
"Vehicle settings"
3
"Steering wheel vibration"
4
Select the desired setting.
The setting is applied to all Toy-
ota Supra Safety systems and
stored for the driver profile cur-
rently used.
Switching steering interven-
tion on/off
The steering intervention can be
switched on and off separately
for Blind spot monitor and lane
departure warning.
Via Toyota Supra Command:
1
"My Vehicle"
2
"Vehicle settings"
3
"Toyota Supra Safety"
4
"Steering intervention"
The selected setting is stored for
the driver profile currently used.
Supra Owner's Manual
4-1. CONTROLS
Display in the instrument
cluster
The system illuminates
green: at lane marking
was detected on at least
one side of the vehicle and
warnings can be issued.
Warning function
If you leave the lane
If you leave the lane and if a
lane marking has been
detected, the steering wheel
vibrates in accordance with the
steering wheel vibration setting.
If the turn signal is switched on
before a lane change, a warning
is not issued.
Steering intervention
If in the speed range up to 130
mph/210 km/h a lane marking is
crossed, the system intervenes
with a brief active steering inter-
vention in addition to vibrating.
The steering intervention helps
keep the vehicle in the lane. The
steering intervention can be
noticed on the steering wheel
and can be manually overridden
at any time. During an active
steering intervention, the display
in the instrument cluster will
blink.
187
4