Toyota GR Supra Owner's Manual page 126

126
4-1. CONTROLS
ary.
P is engaged automatically
■
Selector lever position P is
engaged automatically in situa-
tions such as the following:
 After the drive-ready state is
switched off and selector
lever position R, D or M is
engaged.
 After the standby state has
been switched off when selec-
tor lever position N is
engaged.
 If the driver's safety belt is
unbuckled, the driver's door is
opened, and the brake pedal
is not pressed while the vehi-
cle is stationary and selector
lever position D, M or R is
engaged.
Engaging selector lever
positions
General information
To prevent the vehicle from
creeping after you select a drive
mode, maintain pressure on the
brake pedal until you are ready
to start.
Functional requirements
Only when the drive-ready state
is switched on and the brake
pedal is depressed is it possible
to change from selector lever
position P to another selector
Supra Owner's Manual
lever position.
The selection lever position P
cannot be changed until all tech-
nical requirements are met.
Engaging selector lever
position D, N, R
A selector lever lock prevents
the following faulty operation:
 Unintentional shifting into
selector lever position R.
 Unintentional shifting from
selector lever position P into
another selector lever posi-
tion.
1
Fasten driver's safety belt.
2
Press and hold the button to
release the selector lever
lock.
3
Push the selector lever in the
desired direction, past a
resistance point, if needed.
The selector lever automati-