Toyota GR Supra Owner's Manual page 277

2 bar is reached, see Minimum tire
inflation pressure is reached.
6
Unscrew the connection
hose of the compressor from
the tire valve.
7
Pull the connector out of the
power socket inside the vehi-
cle.
8
Stow the Mobility System in
the vehicle.
Minimum tire inflation pres-
sure is reached
1
Unscrew the connection
hose of the compressor from
the tire valve.
2
Pull the connector out of the
power socket inside the vehi-
cle.
3
Stow the Mobility System in
the vehicle.
4
Immediately drive approx. 5
miles/10 km to ensure that
the sealant is evenly distrib-
uted in the tire.
Do not exceed a speed of 50
mph/80 km/h.
If possible, do not drive at speeds
less than 12 mph/20 km/h.
Adjustment
1
Stop at a suitable location.
Supra Owner's Manual
6-1. MOBILITY
2
Screw the connection hose of
the compressor directly onto
the tire valve stem.
3
Insert the connector into the
power socket inside the vehi-
cle.
4
Correct the tire inflation pres-
sure to at least 2.0 bar.
• Increase tire inflation pres-
sure: with standby state
switched on or the engine
running, switch on the com-
pressor.
• Reduce tire inflation pressure:
press the button on the com-
pressor.
5
Unscrew the connection
hose of the compressor from
the tire valve.
6
Pull the connector out of the
power socket inside the vehi-
cle.
277
6