318
6-1. MOBILITY
Use nylon ropes or straps,
which will enable the vehicle to
be towed without jerking.
Tow fitting
General information
The screw-in tow fitting should
always be carried in the vehicle.
The tow fitting can be screwed
in at the front or rear of the vehi-
cle.
The tow fitting is found in the
onboard vehicle tool kit, refer to
page 302.
Use only the tow fitting pro-
vided with the vehicle and
screw it all the way in.
Use the tow fitting for towing
on paved roads only.
Avoid lateral loading of the
tow fitting, for instance do not
lift the vehicle by the tow fit-
ting.
Supra Owner's Manual
Safety information
NOTICE
If the tow fitting is not used as
intended, there may be damage
to the vehicle or to the tow fitting.
There is a risk of damage to prop-
erty. Follow the notes on using the
tow fitting.
Screw thread for tow fit-
ting
Press on the mark on the edge
of the cover to push it out.
For covers which have an open-
ing instead of a marking, pull the
cover out by the opening.
Tow-starting
Do not tow-start the vehicle.
Start the engine by jump-start-
ing, refer to page 315, if possi-
ble.
Have the reasons for the start-
ing difficulties corrected by your
Toyota dealer.