Toyota GR Supra Owner's Manual page 294

294
6-1. MOBILITY
Functional requirements
■
A current measured value is
available after approx. 30 min-
utes of normal driving.
Displaying the engine oil
■
level
Via Toyota Supra Command:
1
"My Vehicle"
2
"Vehicle status"
3
"Engine oil level"
The engine oil level is displayed.
System limits
■
When making frequent
short-distance trips or using a
dynamic driving style, it may not
be possible to calculate a mea-
sured value. In this case, the
measured value for the last, suf-
ficiently long trip is displayed.
Detailed measurement
Concept
■
The engine oil level is checked
when the vehicle is stationary
and displayed via a scale.
If the engine oil level is outside
its permissible operating range,
a vehicle message is displayed.
General information
■
During the measurement, the
idle speed is increased some-
what.
Functional requirements
■
• Vehicle is parked in a horizon-
tal position.
Supra Owner's Manual
• Selector lever in selector lever
position N or P and accelera-
tor pedal not depressed.
• Engine is running and is at
operating temperature.
Performing a detailed mea-
■
surement
Via Toyota Supra Command:
1
"My Vehicle"
2
"Vehicle status"
3
"Engine oil level"
4
"Measure engine oil level"
5
"Start measurement"
The engine oil level is checked
and displayed via a scale.
Adding engine oil
General information
Only add engine oil when the
message is displayed in the
instrument cluster. The quantity
to be added is indicated in the
message shown on the Control
Display.
Only add suitable types of
engine oil, refer to page 295.
Safely park the vehicle and
switch off drive-ready state
before adding engine oil.
Take care not to add too much
engine oil.