Led Status Indicators; Status Led; Shutter Led - Christie GS Series User Manual

LED status indicators

LEDs are defined below.

Status LED

Identify the LED state colors and meaning.
LED status
Off
Green (flashing)
Green (solid)
Blue (flashing)
Blue (solid)
Yellow (flashing)
Yellow (solid)
Red (flashing)
Red (solid)
White (flashing)

Shutter LED

Identify the shutter LED state colors and meaning.
LED status Projector state
Off Projector is on and an image is displayed. Shutter is open.
Magenta (solid) Projector is on and the image is blank. Shutter is closed.
GS Series DWU1082-GS User Manual
020-001800-01 Rev. 1 (04-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Projector state
AC power is off (without AC plugged in).
Projector is in startup or cool down mode.
System is operating normally.
Projector is cooling down.
AC has been applied, projector is in standby mode.
A problem exists with the projector that does not cause it to shut down.
Examples of warnings include: filter needs changing, one of the pumps is damaged,
or a fan is operating at full speed due to over temperature of LD driver.
The end user is turning off the projector while it is in a warning state.
An error with the projector exists that has caused or may inevitably cause it to shut
down.
Examples of errors include: fan failure, over temperature, wrongly installed filter,
color wheel (CW) failure.
The end user is turning off the projector while it is in an error state.
Projector is in a flash (LAN) update state.
Introduction
16