Christie GS Series User Manual page 37

Menu item Description
Communications Determines the
communication settings such
as network setup, serial port
information, and so on.
Backlight Controls the back light
Preferences behavior and timeout setting
for the keypad and status
LED.
GS Series DWU1082-GS User Manual
020-001800-01 Rev. 1 (04-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Options
LAN:
• DHCP—Turns the DHCP on or off.
• IP Address—Assigns the network IP address.
• Subnet Mask—Assigns the network subnet mask.
• Default Gateway—Assigns the network default gateway.
• MAC Address—Displays the network MAC address value.
• Apply—To save the change of the LAN.
WLAN:
• Enable—Enables or disables the wireless functionality.
• Start IP—Assign the start IP address of the wireless network.
• End IP—Assign the end IP address of the wireless network.
• Subnet Mask—Assign the subnet mask of the wireless
network.
• Default Gateway—Assign the gateway of the wireless
network.
• MAC Address—Display the MAC address of the wireless
dongle, if there is.
• SSID—Display the SSID of the wireless network.
Network:
• Projector Name—Display the name of the projector.
• Show Network Message—Enable or disable to display of the
network message.
• Restart Network—Restart the network.
• Network Factory Reset—Restart the network and set the
projector name, LAN and WLAN configuration to the default
values. For the detail, please see the sector, Network.
Serial Port Baud Rate—Selects the serial port and baud rate.
Serial Port Baud Rate—Selects the serial port and baud rate.
Serial Port Echo—Controls whether the serial port echoes
characters.
Serial Port Path—Sets the serial port path to RS232 or
HDBaseT.
Projector Address—Sets the projector address (0 to 9). The
projector responds to the IR remote set to the same address as
the projector or to the IR remote set to address 0.
—
Operation
37