Intelligent Weighing Technology AGS Series Operation Manual page 9

F15. Setting UTP date and time data
This function allows user to set date and time information for UTP printout.
Under this function:
Use MR for value increase
Use M+ for shifting digit
Use Mode for confirming the setting
Parameter info:
y=xx set last 2 digits of year
m=xx set month
d=xx set date
H=xx set hour
m=xx set minute
F16. Check weighing buzzer output
This function allows user to select various check weighing buzzer output.
Display
bp oFF
bp ok
bp H.L
bp H
bb-Lo
*F19 ~ F21 functions are reserved for verification use.
Description
No alarm for any weighing result
Alarm activates when weighing result falls within the range
Alarm activates when weighing result falls outside the range
Alarm activates when weighing result is greater than target weighing
range
Alarm activates when weighing result is less than the target weighing
range