Intelligent Weighing Technology AGS Series Operation Manual page 8

this function is engaged. The tare weight is automatically cleared when everything is removed from
platter.
tr oFF -> tr on
F10. Original Calibrated Zero Function
This scale is equipped with original calibrated zero function that enables user to select if the original
calibrated zero is required to utilize as the weighing base for initial power-on status.
AC ON - enable original calibrated zero function.
AC OFF - disable original calibrated zero function.
Note:
1. This function is prohibited under NTEP setting.
2. VGS will perform Initial Zero Setting when AC OFF is selected.
AC ON -> AC OFF
F11. Accumulation Function for M+
This scale is equipped with accumulation function enabled/disabled when pressing M+. When
accumulation function is engaged, press M+ will simultaneously print out RS-232/printer data and
perform accumulation function.
Ad on -> Ad OFF
F13. Number of printout copy
9 parameters (copy 1 to copy 9) are available. Select the required number of printout copy here.
COPY 1 -> COPY 2 -> COPY 3 -> COPY 4 -> COPY 5 -> COPY 6 -> COPY 7 -> COPY 8 -> COPY 9
*This function will not appear in the menu if F8. UTP printer mode is disabled.
F14. Total print (Accumulation result) printout
This scale is equipped with total print enabled/disabled when performing memory-clear function.
When total print is disabled, pressing MR and TARE for memory clear will only clear the stored
transaction results, it won't print out data of total.
tt on -> tt oFF
*This function will not appear in the menu if F8. UTP printer mode is disabled.