CONTENTS MII SERIES DIGITAL WEIGHING SCALE 1. INSTALLATION OPERATION MANUAL 2. SPECIFICATIONS 3. KEYBOARD LAYOUT AND DESCRIPTION THIS PRODUCT HAS A MANUFACTURER SERIAL NUMBER. IF 4. INTERNAL FUNCTIONS AND INITIAL SETUP MISSING, MANUFACTURER¡¦S WARRANTY INVALID PRODUCT SHOULD RETURNED YOUR 5. INSTRUCTION FOR USE RETAILER FOR A FULL REFUND.
1. INSTALLATION If not, do not plug in the adaptor, contact your This product manufacturer serial number. dealer immediately. missing, the manufacturer¡¦s warranty is invalid and the product should be returned to your retailer for a full CAUTION: refund. When the power adaptor is being used, take all battery out from the battery pack.
4. INTERNAL FUNCTIONS AND INITIAL SETUP 6. MINUS INDICATOR The scale is equipped with 12 internal functions. They This indicator will appear when value being are: - displayed is at negative value. 7. LO-BAT INDICATOR FUNCTION FUNCTION DESCRIPTION This indicator will appear when the battery voltage is NUMBER low.
Page 5
CAUTION Below numeric number 600.1 is the capacity and division Do not alter any parameters set in Fun 1 & 19, which MII-600 (600g 0.1g), which used cause system unstable error accurate illustration. weighing result. enter mistake, press 600.1 g (metric only) immediately.
Page 6
Protocol 4.2.7 Select UTP Printout Format N81 (Parity = none, data bit = 8, stop bit = 1) 10 formats (form 0 to 9) are available. Select the E71 (Parity = Even, data bit = 7, stop bit = 1) desired format number stored in UTP to be printed.
5. INSTRUCTION FOR USE 5.5 TARE OFF THE WEIGHT OF A CONTAINER 5.1 BEFORE WEIGHING When a container is used, follow the below steps to Make sure that: tare off the weight of it and get a net weight result. a.
6. ERROR CODES AND TROUBLE SHOOTING Refer 4.2.3 Select Auto Power Function Status and Weight Unit to disable 6.1 ERROR CODE the Auto Power Off Function. ERROR CODE DESCRIPTION Check: Is the LO-BAT INDICATOR on? Nostb Calibration weight is not stable Action: Replace battery...
DAILY CARE AND MAINTENANCE Do not splash water on scale. Clean the scale with a soft and damp cloth. If necessary, apply a mild detergent. Do not use any harsh, abrasive material, acetone, volatile solvent, thinner or alcohol for cleaning. Verify the accuracy of scale periodically.
Need help?
Do you have a question about the MII-600 and is the answer not in the manual?
Questions and answers