Table of Contents
Advertisement
MONGOOSE M80II REMOTES
Whilst the supplied remotes will not be used when installed as an 'upgrade', they are however used to
program and configure the alarm features.
Hand the remotes to the vehicle owner and ask for them to be kept in a safe place.
They are NOT used for arming and disarming.
MONGOOSE M80II REMOTE CODE LEARNING
1: Disarm – open driver's door - LED starts fast flashing
2: Within 10sec turn IGN on - the LED will now light solid for 10 seconds
3: Within 10sec, turn IGN OFF then back ON
4: The LED stays on & the siren chirps 3 times to confirm remote code learning mode
5: Press button one on the new remote - siren chirps once to confirm
6: Press button one on a 2nd remote you wish learnt – siren chirps twice to confirm
7: To finish, turn the ignition off or wait 10 seconds - siren chirps quickly 3 times
Any previous working remote controls will need to be reprogrammed
21
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the M80II Upgrade and is the answer not in the manual?