Mongoose M80II Upgrade Manual page 16

PROGRAMMING
Programming is achieved with the ignition on in conjunction with LED flashes and Mongoose
remote button pushes. Do not use the vehicles remote.
Disarm – open driver's door (Keep door open while programming) - LED starts fast flashing
1:
2: Within 10sec' turn IGN on - the LED will now light solid for 10 seconds
3: Within 10 sec press remote button 3 to confirm program mode.
The LED will start slow flashing
4: Count the LED flashes to choose the program to change (eg:7 for siren chirps)
5: As the LED lights the 7th time (as our example), press button three on the remote to input #7.
6: Siren chirps 7 times to confirm programme number 7
7: Press button one on the remote to turn the feature "ON" - siren chirps once
Press button two on the remote to turn feature "OFF" - siren chirps twice
8: Turn the ignition off or wait 10 seconds to EXIT programming. Siren fast chirps 3 times.
Repeat procedure to change any other programme.
16