Mongoose M80II Upgrade Manual page 10

EMERGENCY OVERRIDE
This security system can be disarmed by entering your
unique 4 digit PIN code issued with this product.
KEEP THE CARD IN A SAFE PLACE – NOT IN THE VEHICLE !
Following is an example using PIN code
The code is entered by turning the ignition ON or OFF in sequence with the dash mounted LED.
1) Ignition ON
2) Ignition OFF - LED will start flashing. Count the number of flashes for the first number.
3) Ignition ON
4) Ignition OFF - count the number of flashes.
5) Ignition ON - after
6) Ignition OFF - count the number of flashes.
7) Ignition ON - after
8) Ignition OFF - count the number of flashes.
9) Ignition ON - after
10) The system will now disarm and the vehicle can be started.
Note: If your PIN code contains a "0", this equals '10'.
Should you miss the LED flashes or enter a digit incorrectly, wait for 11 flashes and simply repeat
the procedure from step 1).
– 4 DIGIT PIN CODED
4525
- LED will light permanently to commence override.
4
- after flashes (1 number of the example). The LED will light.
st
5
flashes (2
nd
2
flashes (3 number). The LED will light.
rd
5
flashes (4 number).
th
number).The LED will light.
10
EMERGENCY
4 DIGIT PIN CODE OVERRIDE
PIN CODE:
PLEASE KEEP THIS CARD IN A SAFE PLACE
BUT BE READILY AVAILABLE SHOULD YOU
NEED TO USE THE OVERRIDE PROCEDURE
DO NOT LOSE THIS CARD