Wells WVOC-4HF Operation Manual page 7

ITEM DESCRIPTION
VENTILATOR SECTION CONTROLS
V1 POWER SWITCH
V2 POWER ON INDICATOR
V3 CHECK FILTERS ALARM
INDICATOR
V4* REPLACE PREFILTER
ALARM INDICATOR
V5* REPLACE FILTER PACK
ALARM INDICATOR
V6* SERVICE REQUIRED ALARM
INDICATOR
* See PRECAUTIONS & GENERAL INFORMATION, pages 6 & 7 for special procedures regarding
prefilters and filter packs.
COOKTOP SECTION CONTROLS
H.01 POWER ON INDICATOR
H.02 HOTPLATE CONTROL
H.03 HOT SURFACE INDICATOR
CONVECTION OVEN SECTION CONTROLS
C.01
POWER-OFF-FAN SWITCH
C.02 FAN LOW-OFF-HIGH SWITCH
C.03 OVEN POWER INDICATOR
C.04 HEAT INDICATOR
C.05 DIGITAL DISPLAY
C.06 OVEN TIME CONTROL
C.07 OVEN TEMP CONTROL
C.08 START TIMER KEY
C.09 ACTUAL TEMP KEY
C.10
PGM KEYS
C.11 CANCEL KEY
FEATURES & OPERATING CONTROLS (continued)
COMMENT
Energizes blower motor. If, after 10 seconds, proper conditions
are met, cooktop is energized.
GREEN. Glows when POWER switch is ON.
AMBER. Glows if one or more filters are out of position. Check all
filters and baffles for proper installation.
AMBER. Glows when PREFILTER is approaching the end of its
service life and must soon be replaced.
AMBER. Glows when FILTER PACK is approaching the end of its
service life and must soon be replaced.
RED. Glows when PREFILTER and/or FILTER PACK has reached
the end of its service life and is too loaded to allow sufficient air flow.
Filter MUST be replaced. Appliance is SHUT DOWN until expended
filters are replaced.
AMBER. Glows when associated temperature control is turned ON.
Infinite switch control of temperature of one hotplate section.
RED. Glows any time surface is above 150ºF
Switch to turn oven ON, OFF, or select FAN only.
Switch to turn fan ON, and to select fan speed.
AMBER. Glows when oven is turned ON.
AMBER. Glows when heating elements are energized.
Displays time and temperature information.
A. Time remaining in program (minute : second)
B. Programmed temperature (ºF)
Adjust programmed cooking time.
Adjust programmed cooking temperature.
Begin a timed cook cycle.
Press to display current oven temperature.
Press to select pre-programmed time/temperature.
Press to cancel a program in progress.
5