Maintenance; Regular Maintenance - Carbon Zapp CRU.4R Operation Manual

Operation Manual – "R" Units

Maintenance

Regular Maintenance

Check for Machine Leaks daily

Check the Hoses and Cables for raptures or wear. Replace after 2 years or when

not in good condition
Change Filter and Fluids (after replace go to settings machine to reset time of

the filters and fluids) when the Control Panel reminds, or when the Fluid
becomes Darker. (Note the Discharge and Return Hoses also have small filters,
these filters are also to be replaced
replaced

Log in as service (username: service password: 12345)
Regularly change the screen filter in the Discharge and Return Hoses after a 10

injector tests.
Use Contact Spray for prolonging the life if the cable contacts.

Filter on the Sensor

, message: CHECK INLINE FILTERS
53
) and In-Line Filters need to be