Operation Manual – "R" Units
Filling the Tanks
All Tank ports are marked according to the type of fluid:
MACC: For Cleaning fluid (MACC Function)
TEST: For Calibration Test Oil
TEST.OIL: For Hydraulic High Pressure Oil (HEUI System), use ISO 4113
The procedure is the same for all types of Fluids:
1. Assure the correct filter is placed for this tank
2. Open the Cap for the Tank Port
3. Using the provided funnel, fill with the specific Oil on to the point Marked at the
same tank level indicator
4. Close the tank port cap
After the first use, the level may drop, since the hydraulic system and filter will fill as
well.
29