Ds-R - Carbon Zapp CRU.4R Operation Manual

Operation Manual – "R" Units

DS-R

Intended Use
This unit can fully Test and Clean up to 1 Common Rail Injector. It has the capability to
fit SPR and RSP adapters on Common Rail injector. In addition, it supports EUI (UIPR-A)
and HEUI (HUIR-A) Attachment units, that can perform testing of these Pump-Injectors
1-by-1 and also use RSP and BIP adapters. This unit comes in an automatic (D) & semi-
automatic (A) version and uses an Electronic Volumetric Measuring Unit or Volumetric
Tubes for measuring the injected volume. User intervention is needed in the (A) units
to complete the test for adjusting the Test Pressure and Entering the Volumetric Data.
Front View
Figure: DS-R
1. Injector Harness Cables
2. Diesel Injector (Not included)
3. Injector Clamp / Discharge Height Adjuster (iPSC mounted) with LED
4. Protective Hood
5. HP Knob for controlling the Pressure (Manual HP Machines only)
6. Control Panel / PC
7. On/Off Switch for PC
8. USB Port
9. Adjustable support pads
10. Air Vents
11. MACC level Indicator
12. Test Oil level Indicator
13. MACC Fill Port
14. Test Oil Fill Port
15. Volumetric Tubes (Non-Electronic Measuring unit machines only)
16