Table of Contents
Advertisement
Operation Manual – "R" Units
Filling the Spray Chamber
IMPORTANT: Only use Calibration Testing Oil with the spray chamber.
Use a Funnel to poor Calibration Testing Oil into the Spray Chamber. The Chamber
should be as air free as possible.
Once the Spray Chamber is filled for the first time, it is necessary inject oil from an
injector for at least 2 minutes at a rich TP in order to eliminate any air pockets and to
maximize the efficiency of the measuring unit. The recommended way is in the
"Connections and Leaks" screen, step 3/3.
ALWAYS: Empty the Spray chamber and renew the Oil when the Oil color becomes dark
or dirty, or when notified by the Control panel.
Switch On/Off the Control Panel / PC
The PC is battery operated, and can be used even if there is no power to the machine.
Switch On the PC: Press the On/Off Switch pressed for more than 7sec until the PC
Vendor Logo is displayed. Wait for a few seconds for the PC to boot.
Switch Off the PC: Press the On/Off Switch for a few seconds until the POWER OFF
message is displayed. Select to Power Off or Reboot.
INFO: Although the PC can stay in Stand-By Mode a few days (Short Press the On/Off
Switch), it is recommended to Power Off the PC to conserve battery and battery Life.
Software Setup
Language Selection
All the units are shipped with English as the Default Language. Please change the
software locale to the desired by following these steps:
1. Switch On the machine
2. Power ON the PC (Hold the Power button unit the Manufacturer logo appears)
3. Wait for the system to Boot
4. Press the button AZO to run the software
5. Login as "Guest"
6. Goto HOME>>Options>>Settings>>Locale
7. Select the desired language.
Wi-Fi Setup
This PC system is WiFI and internet capable. It is recommended to connect the machine
to the WiFi and use the following features:
1. Online Update (and notifications)
2. Wireless Printing Reports via Wifi
3. Synchronizing Reports with the PC (Via Dropbox)
31
Hide quick links:
Advertisement
Table of Contents
