Macc - Carbon Zapp CRU.4R Operation Manual

Operation Manual – "R" Units

MACC

For about 15 minutes, the component(s) will Clean with MACC. After this process, the
component and lines will automatically Flush with Test Oil, while wasting this Oil in the
MACC Tank.
During MACC test you need Flush adapter and when the test is finished you need to
remove the Flush adapter and you have to use RSP Sensor or iPSC Chamber.
Once the MACC Step is over, the unit will automatically begin Testing the
component(s).
USON Backflush (only for GD and GDU series)

42