Select Tests - Carbon Zapp CRU.4R Operation Manual

Operation Manual – "R" Units

SELECT TESTS

In this screen, the user can select which Tests to perform. In addition, the user is
informed if the MACC will also perform.
Consider unselecting RSP and NOP if there is no RSP Adapter installed.
From the Options Button, the user can select to enter Manual Mode.
Test plan meanings:
R2LC: resistance, inductance capacitance test.

ANOP: automatic nozzle opening pressure test (only with RSP sensor)

RSP: injector nozzle response test (only with RSP sensor)

IVM VL: full load injection measurement test

IVM EM/TL: part load / emissions injection measurement test

IVM LL: low load/ idle speed injection measurement test

IVM VE: pre/post injection measurement test

LKT: static backleak measurement test

NLT: measure the Nozzle Injector Leak

41