Printer Setup; Personal Data / Accounts - Carbon Zapp CRU.4R Operation Manual

Operation Manual – "R" Units
4. Getting Instant support (Via TeamViewer)
5. Sending Report by Email
Steps on how to connect to a WIFI Network:
1. Switch On the machine
2. Power ON the PC (Hold the Power button unit the Manufacturer logo appears)
3. Wait for the system to Boot
4. Press the button AZO to run the software
5. Login as "Guest"
6. Goto HOME>>Options>>Settings>>Wi-Fi Settings
7. Select the desired Network
8. Enter the Credentials and connect.

Printer setup

The system is capable of connecting to many different Printers via WiFi, Bluetooth or
USB (Only WiFi is provide free of cost).
To connect to the printer:
1. Assure the Printer is powered
2. Connect to the Printer and the Machine on the same WiFi network, or via
USB/Bluetooth
3. Open the Printer Application from the Applications list and make the connection
4. Print a test page to verify correct operation.

Personal Data / Accounts

OWNER INFO
Go to HOME>>Options>>Settings>>Owner Info and enter the data for the owner of the
machine. This data will be shown on the saved and printed report.
GMAIL
The saved reports can be shared also by Gmail, so long there is internet to the
machine. Once this method is selected, the user can setup the Gmail and use it.
Dropbox
The saved reports can be shared also by Dropbox, so long there is internet to the
machine. Once this method is selected, the user can setup the Dropbox and use it.
TeamViewer QC
Is a portal to provide service support to the unit from the internet. Once, selected
HOME>>Options>>TeamViewer QC, give the 9 digit number to your service
representative.
32