Gd-R - Carbon Zapp CRU.4R Operation Manual

Operation Manual – "R" Units

GD-R

Intended Use
This unit can fully Test and Clean up to 1 HP Gasoline Direct Injector. This unit comes in
an automatic (D) & semi-automatic (A) version and uses an Electronic Volumetric
Measuring Unit or Volumetric Tube for measuring the injected volume. User
intervention is needed in the (A) units to complete the test for adjusting the Test
Pressure and Entering the Volumetric Data
Front View
Figure: GD-R
1. Injector Harness Cables
2. Gasoline Injector (Not included)
3. Injector Clamp / Discharge Height Adjuster (iPSC mounted) with LED
4. Protective Hood
5. HP Knob for controlling the Pressure (Manual HP Machines only)
6. Control Panel / PC
7. On/Off Switch for PC
8. USB Port
9. Adjustable support pads
10. Air Vents
11. MACC level Indicator
12. Test Oil level Indicator
13. MACC Fill Port
14. Test Oil Fill Port
15. Volumetric Tube (Non-Electronic Measuring unit machines only)
18