Table of Contents
Advertisement
I N S T A L L A T I O N M A N U A L
X - S T R E A M 2 ™ S L I D E
IMPORTANT NOTICES TO THE INSTALLER
THE X-STREAM 2 SLIDE CAN BE ASSEMBLED AND INSTALLED IN EITHER A LEFT
OR RIGHT TURN CONFIGURATION.
INTER-FAB HIGHLY RECOMMENDS THAT YOU READ THE ENTIRE INSTALLATION
MANUAL BEFORE YOU ATTEMPT THE INSTALLATION OF THE X-STREAM 2 SLIDE.
YOU MUST USE THE PROVIDED ANTI-SEIZE ON ALL THE BOLTS AND ALL-THREADS
OR THE NUTS MAY SEIZE.
INTER-FAB RECOMMENDS THAT A TWO-PERSON CREW ASSEMBLE THE X-STREAM
2 SLIDE.
INTER-FAB HIGHLY RECOMMENDS THAT YOU FOLLOW THE INSTALLATION
SEQUENCE IN THIS MANUAL.
THE SLIDE POSITIONING GRAPHICS ON PAGES 5 AND 6 ARE FOR REFERENCE
ONLY.
INTER-FAB STRONGLY RECOMMENDS THAT ONLY THE FULLY AND
CORRECTLY ASSEMBLED SLIDE BE USED TO LOCATE THE POSITIONS FOR THE
ANCHOR BOLTS AS DESCRIBED ON PAGE 15.
XS2-IM Rev. 10/14 (SBK-XS2 INSTALL)
2
Advertisement
Table of Contents
Need help?
Do you have a question about the X-STREAM 2 SLIDE and is the answer not in the manual?
Questions and answers