4.
Remove the bolts and washers.
5.
Carefully lift the bushing from the transformer.
6.
Install the transport cover (13) on the transformer
turret (11).
7.
Lower the bushing to the floor.
End of instruction
7.2 Removal of the bushing from the transformer, draw rod
Procedure
1.
Install the lifting tool, refer to Installation of lifting tools, page 20.
56
CAUTION!
Do not cause damage to the stud bolts, there is a risk of metal falling into the transformer.
CAUTION!
Make sure that there is soft bedding, or support blocks on the floor.
Installation and maintenance guide
1ZSC000563-AAB EN, REV. 6, 2019-09-12