Table of Contents
Advertisement
2.
Make sure that there is a distance of 7 ±0.5 mm
between the pressing ring (17) and the pulling
ring (3).
3.
Make sure with a torque wrench that the the six
bolts are tightened with a torque of 40 Nm.
4.
Make sure that the gasket is installed in the turret
flange.
Installation and maintenance guide
1ZSC000563-AAB EN, REV. 6, 2019-09-12
NOTE!
The gasket is supplied by the
transformer manufacturer.
Torque
40 Nm
23
Advertisement
Table of Contents
