ABB GSBK Series Installation And Maintenance Manual page 59

8. Pull up the draw rod, and install the washer (11)
and nut (10).
9.
Remove the pull-through cord.
10. Lower the bushing to the floor.
11.
Install the lower draw rod (4) in the transport
cover (13).
12.
Install the transport cover (13) on the transformer
turret (11).
End of instruction
Installation and maintenance guide
1ZSC000563-AAB EN, REV. 6, 2019-09-12
CAUTION!
Make sure that the centering ring (28)
is in position, it is necessary for the
correct installation of the draw rod.
CAUTION!
Make sure that there is soft bedding, or support blocks on the floor.
59