2.
Put the pull-through cord (12) through the
box-spanner (13).
3.
Apply Vaseline to the thread on the pull-through
cord (12), then connect it to the draw rod.
4.
Remove the M16 nut (10) on the draw rod with
the box spanner (13).
Installation and maintenance guide
1ZSC000563-AAB EN, REV. 6, 2019-09-12
NOTE!
The terminal on the pull-through cord
(12) has M8 threads.
NOTE!
Or use a lubricant with equal properties
to Vaseline.
57