Table of Contents
Advertisement
4.4 Preparations with draw rod
4.4.1 Removal of the outer terminal
Procedure
1.
If the bushing has the optional transport container
installed, remove it.
2.
Remove the hex screws (6).
3.
Put the blades of two screwdrivers in the recesses
(19) in the outer terminal (5), and carefully push
them down to lift the outer terminal (5) straight up.
Installation and maintenance guide
1ZSC000563-AAB EN, REV. 6, 2019-09-12
CAUTION!
Do not cause damage to the RIP-core
when removing the transport container.
CAUTION!
Do not cause damage to the
shield (18).
27
Advertisement
Table of Contents
