Configuring Watch Settings - Casio 3482 Operation Manual

3. X
Use (A) and (C) to move the pointer to
[PHONE FINDER].
4. X
Press (B).
5. X
Use (A) and (C) to move the pointer to
[EXECUTE].
6. X
Press (B).
This will establish a connection between
the watch and phone, and sound the
phone's ringtone.
It will take a few seconds before the
●
phone tone sounds.
7. X
Press any button to stop the sound.
You can press any watch button to stop
●
the phone tone, but only during the first
30 seconds after it starts to sound.
Note
Connection with your phone is not
●
possible while the watch's Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
Using the Watch in a Medical
l
Facility or Aircraft

Configuring Watch Settings

After establishing a connection between the
watch and a phone, you can use G-SHOCK
MOVE to configure watch settings and to view
information acquired by the watch.
Make sure that the symbol is shown on the
e
●
watch display when you perform the
procedure below.
If is not displayed, refer to the information
e
●
at the link below.
Connecting with a Phone
l
1. Y
Tap the "G-SHOCK MOVE" icon.
2. Y
On the menu bar, tap "More".
3. Y
Tap "Watch".
4. Y
Select your preferred watch.
5. Y
Select the setting you want to change
and then perform the operation shown on
the screen.
Operation Guide 3482
Connection
Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l C
Important!
If you have problems establishing a
●
connection, it could mean that G-
SHOCK MOVE is not running on your
phone. On your phone's home screen,
tap the "G-SHOCK MOVE" icon.
Perform the operation shown on the
screen to pair with the watch.
Unpairing
Unpairing the watch from a phone requires
both G-SHOCK MOVE and watch operations.
Note
If you are using an iPhone, also delete
●
the pairing information stored on the
phone.
Deleting Pairing Information from G-
●
SHOCK MOVE
1. X
If the watch is connected with a phone,
enable the watch's Airplane Mode.
Using the Watch in a Medical Facility or
l
Aircraft
2. Y
Tap the "G-SHOCK MOVE" icon.
3. Y
On the menu bar, tap "More".
4. Y
Tap "Watch".
5. Y
Tap "Manage".
6. Y
Tap the watch you want to unpair.
7. Y
Perform the operation shown on the
screen.
Deleting Pairing Information from the
●
Watch
1. X
Enter the Timekeeping Mode.
Navigating Between Modes
l
2. X
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. X
Use (A) and (C) to move the pointer to
[PAIRING].
4. X
Press (B).
5. X
Use (A) and (C) to move the pointer to
[UNPAIRING].
Pointer
6. X
Press (B).
7. X
Use (A) and (C) to select whether or not
you want to delete the pairing information.
[YES] Deletes pairing information.
[NO] Does not delete pairing information.
8. X
Press (B).
After pairing information deletion is
complete, [DELETE COMPLETED] will
appear for a few seconds, and then the
Timekeeping Mode setting screen will re-
appear.
9. X
Press (D) to exit the setting screen.
13