Setting The Timer Start Time - Casio 3482 Operation Manual

Deleting All Notifications
1.
Enter the Notification Mode.
Navigating Between Modes
l
2.
Press (B).
This displays the notification list.
3.
Hold down (A) for at least two seconds.
This displays the Notification Mode
setting screen.
Pointer
4.
Use (A) and (C) to move the pointer to
[DELETE].
5.
Press (B).
6.
Use (A) and (C) to move the pointer to
[ALL].
7.
Press (B).
8.
Use (A) and (C) to move the pointer to
[EXECUTE].
To cancel data deletion, move the
●
pointer to [CANCEL].
9.
Press (B).
This displays a confirmation screen.
10.
Use (A) and (C) to move the pointer to
[YES] or [NO].
11.
Press (B).
After the data delete operation is
complete, [DELETE COMPLETED] will
appear for a few seconds, and then the
Notification Mode screen will re-appear.
Operation Guide 3482
Timer
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
The sound and/or vibration alert operations
●
will not be performed while battery power is
low.

Setting the Timer Start Time

The start time can be set in 1-second units up
to 60 minutes.
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the number of timer repeats
(1 to 20) setting screen.
Number of repeats
3.
Use (A) and (C) to specify the number of
timer repeats (Auto Repeat).
4.
Press (B).
5.
Use (A) and (C) to specify the position of
the timer in the sequence.
6.
Press (B).
This moves the cursor to the minutes
setting.
7.
Use (A) and (C) to change the minutes
setting.
8.
Press (B).
This moves the cursor to the seconds
setting.
9.
Use (A) and (C) to change the seconds
setting.
10.
Press (B).
11.
Use (A) and (C) to select whether or not
you want to save your current settings.
[YES]
[NO]
[RETURN]
12.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timer Mode
screen will re-appear.
Note
●
Timer sequence
Minutes
Seconds
Saves current settings.
Discards current settings.
Returns to the number of
repeats setting.
To exit the timer setting operation at
any point, press (D) and advance to
step 11.
23