Casio 3482 Operation Manual page 17

Specifying the Tide Level
Unit
You can select either centimeters (cm) or feet
(ft) as the tide level unit.
Important!
When Tokyo (TOKYO) is set as your
●
Home City, the unit is fixed as
centimeters (cm) and cannot be
changed.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[UNIT].
4.
Press (B).
5.
Use (A) and (C) to move the pointer to
[TIDE].
6.
Press (B).
7.
Use (A) and (C) to specify the unit you
want.
[CENTIMETER] Centimeters
[FEET] Feet
8.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the unit setting
screen will re-appear.
9.
Press (D) twice to complete the setting
operation.
Operation Guide 3482
Using the Training
Function
The Training Mode uses an accelerometer to
measure and record distance, elapsed time,
pace, and other data while you are running or
walking.
You can review recorded data on the watch or
with G-SHOCK MOVE.
Run Timing
Using the Training Function, start running.
Starting Run Timing
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (B).
This displays the Training Mode screen.
Training Mode
3.
Press (B).
Start run timing.
Pausing Run Timing
●
1.
While the run timing screen is displayed,
press (B).
This pauses run timing and displays the
pause menu screen.
Pause Pause menu
2.
Use (A) and (C) to select what you want to
do with the run timing data you have just
measured.
[RESUME] Resumes timing.
[SAVE] Saves data.
[DELETE] Deletes data.
3.
Press (B).
If you select the data save option, the
●
run timing result screen will appear.
Pressing any button returns to the
Timekeeping Mode.
If you select the data delete option, the
●
watch returns to the Timekeeping
Mode.
Measuring Lap Times
●
1.
Start run timing.
Starting Run Timing
l
2.
Press (D).
Each press of (D) displays the elapsed
time of the current section or lap (lap time)
to appear.
Split time, running distance
3.
Press (A) or (C) to return to the run timing
screen.
If you do not perform any button
●
operation, the watch will return to the
run timing screen automatically after
about 10 seconds.
Note
You can use G-SHOCK MOVE to
●
specify whether [SPLIT TIME] or
[DISTANCE] is displayed.
Lap time
17