Configuring Alarm Settings
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[ALARM].
4.
Press (B).
5.
Use (A) and (C) to move the pointer to the
alarm you want to set.
6.
Press (B).
7.
Use (A) and (C) to select an alarm and
snooze function ON/OFF setting.
Disables alarms, disables
[OFF]
snooze.
Enables alarms, disables
[ON]
snooze.
Enables alarms, enables
[ON (SNZ)]
snooze.
The currently selected setting will be
●
indicated by a check mark (
left.
Operation Guide 3482
8.
Press (B).
9.
Use (A) and (C) to set the alarm hour.
10.
Press (B).
11.
Use (A) and (C) to set the alarm minute.
12.
Press (B).
13.
Use (A) and (C) to select whether or not
you want to save your current settings.
[YES]
Saves current settings.
[NO]
Discards current settings.
Returns to the alarm setting
[RETURN]
screen.
14.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the alarm setting
selection screen will re-appear.
Turning on an alarm causes
●
appear on the display to the right of the
time setting. If snooze is enabled, [SNZ]
also appears.
15.
Press (D) twice to exit the setting screen.
Note
To exit the alarm setting operation at
●
any point, press (D) and advance to
step 13.
To stop a sounding alarm
●
While an alarm sound and/or vibration
operation is being performed, press any
button to stop it.
Note
) to the
When snooze is enabled for an alarm,
●
alarm sound and/or vibration will
repeat every five minutes, up to seven
times. To stop an alarm's ongoing
snooze operation, turn off the alarm.
Turning Off an Alarm
To stop an alarm sound and/or vibration
operation, perform the steps below to turn it
off.
To reactivate an alarm sound and/or
●
vibration operation, turn it back on.
Note
An indicators is displayed while any
●
one of the alarms is turned on.
The alarm indicator is not displayed
●
while all of the alarms are turned off.
to
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[ALARM].
4.
Press (B).
5.
Use (A) and (C) to move the pointer to the
alarm you want to turn off.
Pointer
27