MODEL 5081-A
7.9 LINE FREQUENCy
7.9.1 Purpose
This section describes how to maximize noise rejection by entering the frequency of the mains power into the transmitter.
PROGRAM
line fre9
EXIT
NEXT
ENTER
PROGRAM
line
60
EXIT
ENTER
44
7.9.2 Procedure
1. Press PROG on the remote controller.
2. Press NEXT until the LinE FrEq submenu appears. Press ENTER.
3. Use é or ê to toggle the line frequency between 50 and 60 Hz. Press ENTER to
save.
4. Press RESET to return to the main display.
SECTION 7.0
PROGRAMMING