Custom Audio Electronics VKP80III User Manual page 91

Printing head
1
Disconnect the power supply cable and
Disconnect the power supply cable and
open the device cover (see
open the device cover (see paragraph 5.1).
2
ISOPROPYL ALCOHOL
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
Clean the printing head by using
a non-abrasive cloth moistened with isopropyl.
paragraph 5.1).
ON
Platen roller
1
Disconnect the power supply cable and
Disconnect the power supply cable and
open the device cover (see
open the device cover (see paragraph 5.1).
2
ISOPROPYL ALCOHOL
Clean the dragging roller
and the ejector roller by using
a non-abrasive cloth moistened with isopropyl.
paragraph 5.1).
91