Table of Contents
Advertisement
3 - Description
Liquid system
General info - MANIFOLD system
The functions of the spray circuits are operated via the centrally
situated MANIFOLD valves with colour coded plates and pictorial
symbols for easy operation.
The modular MANIFOLD system facilitates the addition of optional
extras on both pressure side and suction side.
Pump
A diaphragm pump with 6 diaphragms, model 363, with easily accessible valves and diaphragms. Standard = 540 r.p.m.
(6 splines).
Valves and symbols
The valves are distinguished by coloured identification discs on the valves. Symbols corresponding to the optional extras
are located on the discs for easy identification and operation. A function is activated/opened by turning the handle
towards the desired function.
ATTENTION! Only the functions in use should be open - always close remaining valves.
ATTENTION! If a MANIFOLD valve is too tight to operate - or to loose (= liquid leakage) - the valve needs to be ser-
viced. Please see the section 'Maintenance' for further information.
Green valves - Green disc = Pressure valve
To spray boom
To Tank Rinsing Nozzle
3.4
To HARDI FILLER
To agitation
Advertisement
Table of Contents
