Adjusting The Installer Level (For Installers Only) - Bosch WORCESTER FR 10 Installation & User's Instructions

B Briefly press
B Press mode until the current room temperature is displayed.
5.4
B Accessing installer level: Hold down mode for approx. 6 sec-
onds until – – – is displayed.
B Release the mode key and turn
eter is shown:
– 5A p = Code
– 5b p = Heating circuit configuration
– 6A p = Adjust the integral room temperature sensor
– 6b p = Adjustment factor I
– 6C p = Amplification factor V
– 6d p = Maximum flow temperature
– 6E p = Mixer runtime
Briefly press
B
selected parameter is displayed.
Briefly press
B
Turn
B
B Briefly press
B Press mode until the current room temperature is displayed.
very to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.c
Adjusting the installer level (for installers
only)
The installer level is exclusively designed for install-
ers.
: The current value for the previously
: The current value flashes.
to select the required value.
6 720 617 760 (2008/09)
to save the value.
to save the value.
Operation
until the required param-
19