Manual Mode/Time Program; Hot Water; Combi Boilers; Temporarily Adjusting The Hw Time Program - Bosch CT 100 Operating Manual

Hold (Long press)
▶ Press and hold an up or down key to change the displayed
temperature quickly.

5.1.2 Manual mode/time program

The time program can only be set using the App on your smart
device.
70
0
1
Fig. 15 Choose manual mode/time program
[1] Manual mode icon
[2] Time mode icon
▶ Briefly press the manual mode or time program icon to
switch between these functions.
5.2

Hot Water

5.2.1 Combi boilers

The boiler preheat function must be enabled to allow the Bosch
Control to take control of your hot water.
Refer to your combi boiler user guide to enable the preheat
function, i.e. turn the ECO function off.
For combi boilers the hot water screens are only accessible
when the hot water control is enabled by you in the App.

5.2.2 Temporarily adjusting the HW time program

Tap the "Time program" icon twice to enter the HW timed
function, tap either the "HW timed" icon to switch the hot water
ON until the next time period or "HW not timed" icon to switch
the hot water OFF until the next time period.
Tap the "back" icon to return to the normal screen.
Bosch Control
70
0
2
68
.0
70
.0
2x
6720816118-6.1TD
Fig. 16 Hot water screens

5.2.3 Setting the HW permanently ON or OFF

Tap the "manual" (hand) icon twice to enter the function, tap
either the HW icon for permanently ON or the "no HW" icon for
permanently OFF.
Tap the "back" icon to return to the normal screen.
Hot water will now remain permanently in this selected state
until the "Time program" icon is selected.
70
.0
2x
6720816118-7.1TD
Fig. 17 Permanently ON or OFF
Operation | 9
6720816118 (2015/08)