Operation
5.3
Changing the standard setting of the required
room temperature
B Accessing user level: Hold down mode for approx. 3 seconds
until – – is displayed.
B Release the mode key and turn
eter is shown:
– 1A p = Required room temperature for
– 1b p = Required room temperature for
– 1C p = Required room temperature for
B Briefly press
selected parameter will be displayed.
B Briefly press
B Turn
–
the living space is occupied and occupants require a com-
fortable room temperature). Setting range higher than
–
room temperature is adequate or if everyone is away or
asleep and the house should not cool down excessively). Set-
ting range higher than
–
is away or asleep and the house should not cool down
excessively). Consider any pets and plants. Setting range
lower than
18
very to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.c
Use this function if you want to permanently change
the required room temperature away from the
standard setting.
: The current temperature for the previously
: The current temperature flashes.
to adjust the required room temperature:
Comfort = maximum required temperature (e.g. when
Economy up to 30 °C.
Economy = average required temperature (e.g. if a low
Frost = minimum required temperature (e.g. if everyone
Economy down to 5 °C.
until the required param-
Frost and lower than
6 720 617 760 (2008/09)
Comfort
Economy
Frost
Comfort.