20 Ma Value Setting; Digital Filter Value Setting - Lutron Electronics CT-2012 Operation Manual

Remark :
* During adjust the value, the " SV indicator " ( 3-3, Fig. 1 )
will light.
c. 20 mA value setting
1) After finish the " 4 mA value setting", press the
" Set Button " ( 3-4, Fig. 1 ) once, the " Display "
will show " 20-A ", now the meter is ready for the
" 20 mA value " setting, for example 20 mA input signal
= 100 or other value upon user own requirement.
▼
2) Use the "
( 3-6, Fig. 1 ) to adjust the desiring " 20 mA value ",
press the " Set Button " ( 3-4, Fig. 1 ) to save the setting
value.
Remark :
* During adjust the 20 mA value, the " SV indicator "
( 3-3, Fig. 1 ) will light.
d. Digital filter value setting
1) After finish the " 20 mA value setting", press the
" Set Button " ( 3-4, Fig. 1 ) once, the " Display "
will show " FiLt ", now the meter is ready for the
" Digital filter value " setting.
▼
2) Use the "
( 3-6, Fig. 1 ) to adjust the desiring " Digital filter value ",
press the " Set Button " ( 3-4, Fig. 1 ) to save the setting
value.
Remark :
* During adjust the value, the " SV indicator " ( 3-3, Fig. 1 ) will light,
* The setting range of " Digital filter value " is from 1 to 99.
the default value is 1.
* The more value will get more " Digital filters ", the
Display will be more stable, however the more " Digital
filter value " the response time of Display will be slowly.
Button " ( 3-5, Fig. 1 ) and the "
Button " ( 3-5, Fig. 1 ) and the "
10
▲
Button "
▲
Button "