Dry Lens Test - Ultra Optics MR3 Standard Operating Procedure

Dry Lens Test

Press PRODUCTION CYCLE.
Chuck a lens on the suction cup located
over the wash bowl.
When the wash pump starts to beat, count
how many times it beats before the air jet
turns on.
This needs to be 21 beats for the M/R III
and 26 beats for the OTB.
Allow the lens to complete the drying
cycle.
As soon as the spindle starts to come up
out of the wash bowl, press CYCLE
STOP.
Remove the lens using the foot pedal.
Wipe away any moisture from the front
side of the lens and inspect the backside
to ensure it is dry.
6