Ultra Optics MR3 Standard Operating Procedure page 5

Start Up Procedure
Check the coating height to make sure
it is level with the top of the coating
bowl.
Run one or more sample lenses to verify
that the lens is dry before running live
work.
Using a Kimwipes
front opening and check to make sure the
Kimwipes
opening at a 45˚ angle.
If it is not, use the adjustment knob
located on the top of the HEPA filter
blower unit.
Refer to page 5
Refer to page 6
TM
, hold it above the
TM
is blowing away from the
3