Table of Contents
Advertisement
Preventive Maintenance
Weekly
Visually inspect the suction cups and water
deflectors for any deterioration. Replace as
needed.
Check the spindle speeds at each spindle.
Coat speed:
400 RPM
(+ or - 25)
Wash speed:
1800 RPM (+ or - 50)
Coat spin-off speed: 2000 RPM (+ or - 50)
1600 RPM
(AST-1)
Check that the lamp cycle time is at 24
seconds. If it is not, adjust by using the
speed potentiometer labeled LAMP.
Clockwise to decrease
Counterclockwise to increase
Replace the Hepa Pre-Filter
16
Hide quick links:
Advertisement
Table of Contents
