Priming The Wash Pump - Ultra Optics MR3 Standard Operating Procedure

Priming The Wash Pump

Press MACHINE SET-UP.
Press VACUUM.
Chuck a lens on the suction cup over the
wash bowl.
Press WASH PRIME.
Press DUMP VALVE.
Allow to run until the pump slows down.
Press DUMP VALVE again to close. Beats
should be a steady constant beat, much like
a heartbeat.
If wash prime has not been achieved, run
with DUMP VALVE open until the pump
slows down.
Press WASH PRIME.
Press DUMP VALVE.
The wash pump should now be primed.
23