Replacing Tyres - Zodiac EvoluX iQ Series Owner's Manual

Page 20
4. Thread each tab into the slot provided and
gently feed it through until the heel comes
out at the other side of the slot.
4
Figure 28. Pull Tabs Through Each Slot
5. Use a pair of scissors to cut the tabs 3/4
inch from the heel so that they are no higher
than the cleaning blade.
6. Repeat the procedure to install the second
brush.
Figure 29. Cut Tabs
Zodiac EvoluX iQ Robotic Pool Cleaner
® ™

Replacing Tyres

1.
Figure 30. Pull the Old Tyre Over the Wheel
2.
Figure 31. Remove the Old Tyre
3.
Towards
Body
Figure 32. Tyre Replacement Orientation
|
Owner's Manual
Pull on the inside of the old tyre to remove
the tire lip from the wheel
1
Remove the old tyre.
2
To replace the tyre, position the tyre on the
wheel making sure to orient the tyre so that
the word INSIDE is toward the body of the
cleaner.
1