Clean The Filter Canister - Zodiac EvoluX iQ Series Owner's Manual

Robotic pool cleaner
Table of Contents

Advertisement

If tangling occurs, follow these steps:
1.
Remove the cleaner from the pool using
the Lift System. When the cleaner is within
arm's reach, use the handle to remove
from the water. Never lift the cleaner out of
the pool by the floating cable or swivel.
2.
Hold the cleaner vertically to drain.
Figure 15. Keep Cleaner Vertical to Drain Water
3.
Unplug power to the cleaner at the control
box.
Figure 16. Unplug
4.
Remove the cleaner from the pool and
untangle all kinks and coils in the power
cable. Start at the cleaner head. Lay the
cable in the sun to loosen any tangling
memory.
Zodiac
EvoluX
iQ Robotic Pool Cleaner
®
|
Owner's Manual
Figure 17. Untangle

Clean the Filter Canister

The filter canister should be cleaned at the end of
each cycle.
1.
Remove the cleaner from the water using
the Lift System and let the remaining water
drain.
2.
Set the unit on four wheels.
3.
Push the cover lock (1) and lift the cover (2)
until it is secured in the vertical position.
1
Figure 18. Lift Cleaner Cover
Page 17
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evolux ex4000 iqEvolux ex5000 iqEvolux ex6000 iq

Table of Contents