Iaqualink Control; Iaqualink™ Control Home Screen; Start / Stop Cleaning And Adjust Cleaning Time; Set Cleaning Mode - Zodiac EvoluX iQ Series Owner's Manual

Page 14
6
iAquaLink
Control
Once you have downloaded the iAquaLink app
and connected the device to Wi-Fi, the iAquaLink
app allows for robotic cleaner control from
anywhere, anytime. Functions vary within the
iAqualink app depending on which cleaner model
you have.
WARNING
Do not enter pool while the robotic cleaner
is in water.
iAquaLink™ Control Home Screen
App function and design is subject to change.
Start/Stop Cleaning
Remote
Clean Mode
Lift System
Start / Stop Cleaning and Adjust
Cleaning Time
The factory default cleaning surface setting is
SMART Cycle (Floor, Wall, Waterline).
SMART Cycle calculates a customized cleaning
time optimized for your pool. On the first run of
SMART Cycle, the app counts up as it calculates
the optimized cleaning time.
On periodic SMART Cycle cleaning, the app will
count down from the optimized cleaning time.
Zodiac EvoluX
®
™
Dirty Canister Indicator
+
+
Manual Time Adjustment
_
(current run time +/- 15 minutes)
_
°C / F Water Temperature
Display
(model EX6000 only)
|
iQ Robotic Pool Cleaner Owner's Manual
™
NOTE: To recalculate SMART Cycle, go to the Set
Cleaning Mode after the initial calculation.
1. From the Home screen or the Control Box.
press the Start/Stop button to begin
cleaning.
2. The app displays the cycle time in hours
and minutes.
To increase or decrease the cycle time
during cleaning,
press the (+) and (–) buttons.
-Time adjusts up or down in 15 minute
increments.
-Minimum run time is 30 minutes.
-Maximum run time is 3 hours 30 minutes.
-The control box displays the same countdown
and cycle setting as the app.
3. Press
progress cleaning cycle.

Set Cleaning Mode

1. From the main screen, select Cleaning
Mode to view options.
2. Choose from available cleaning modes
depending on your cleaner model.
*3. In Custom mode (if applicable), select the
cleaning surface and cleaning intensity
from the on-screen icons.
* not available on all models
to interrupt and cancel an in-